Temperature Control Outdoor Telecom Cabinet 41U Rack Double Door Anti Corrosion Powder Coated
1. Cabinet drawing
The cabinet is suitable for outdoor environment, such as road side,
park, building roof, mountain area, flat ground, etc.
The cabinet can be installed with base station equipments, power
supply equipments, batteries, temperature control equipments,
transmission equipments and other equipments, or the cabinet can
reserve installation space and heat exchange capacity for the above
equipments, providing reliable mechanical and environmental
protection for normal operation of the internal equipments.
The cabinet is mainly used in wireless communication base station,
such as 4G, communication/network integrated service,
access/transmission switching station, emergency
- The cabinet is weatherproof, such as sun-proof, dust-proof and
waterproof, which is used in outdoor environment.
- Cabinet cooling: air conditioner and auxiliary direct ventilation
- Cabinet load bearing: ≥600kg
- Ingress protection: IP55( we can also support IP65)
- The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. There are entrance holes
individually for power cable, signal cable and optical cable.
- All the cables used in the cabinet are made from flame retardant
- The cabinet includes grounding bar.
- Surface treatment: degreasing, derusting, rustproof phosphating (or
galvanizing), powder coated.
- Flame retardance: comply with GB5169.7 test A
- Insulation resistance: the insulation resistance between grounding
devices and cabinet body parts is not lower than 2×104M/500V(DC).
- Withstand voltage: the withstand voltage between grounding devices
and cabinet body parts is not lower than 3000V(DC)/1min.
- Mechanical strength: each surface can bear upright pressure
>980N; after the door is open, its outer end can bear upright
In a word, our Energy Saving Integrated Cabinet can provide
complete solutions for outdoor working environment and safety
management of telecom base station. As a base station, it can
integrate the main equipments, system power supply, AC and DC power
distribution, environment monitoring, batteries, lightning
protection and grounding devices. As functional cabinet (battery
cabinet, power supply cabinet, transmission cabinet etc.), it can
help telecom carriers to realize easy station obtaining, energy
saving, fast deployment.
4. Product Advantages Introduction
(1) Technical Parameters
External Dimension: W×D×H 900×900×2100mm
Internal Dimension: W×D×H 800×800×1800mm
|Equipment Installation Method||19” rack|
|Door||With one front door and one back door, and anti-theft three point
lock for outdoor cabinet (support padlock)|
|Material||Galvanized steel, sandwich structure panel, double wall with heat
|Heat Insulation||There are heat insulation between inner wall and outer wall.|
|Temperature Control||Cooling||AC220V 50Hz air conditioner and DC48V fans|
|Lightning Proof||Grade B lightning proof||Nominal: 60KA, Max.: 100KA|
|Lighting||LED lamp||48V LED lamps (immovable), with protective circuit breaker|
|Temperature||Temperature||Working Temperature: -40°C ~ +55°C|
|Storage Temperature: -50°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1120 ×(1±5%)W/m2|
(2) Configuration List
|1||Outdoor Telecom Cabinet||1||Set|
(1) External Dimension:W×D×H 900×900×2100mm
Internal Dimension: W×D×H 800×800×1800mm
(2) One compartment: equipment compartment
(3)With one front door and one back door , and anti-theft three
point lock for outdoor cabinet (support padlock)
(4) Material: galvanized steel, sandwich structure panel, double
wall with heat insulation
(4.1) Cabinet left side, right side and back: sandwich structure
panel, outer plate: 0.5mm galvanized steel, inner plate: 0.5mm
galvanized steel, insulation: 45mm flame retarded EPS.
(4.2) Cabinet door and base: outer plate: 1.5mm galvanized steel ,
inner plate: 0.8mm galvanized steel, insulation: 40mm PEF.
(4.3) Cabinet roof: sandwich structure panel (outer plate: 0.5mm
galvanized steel, inner plate: 0.5mm galvanized steel, insulation:
45mm flame retarded EPS. ) + 1.0mm galvanized steel.
Cooling capacity: 1500W,
Power supply: AC220V, 50HZ,
|3||Auxiliary Direct Ventilation Fans||2||PC||DC48V|
|4||Environment Monitoring Unit||1||Set|
19", 1U; Power Supply: DC48V
Support RS485 and TCP/IP communication interface
|7||Temperature and Humidity Sensor||1||PC|
|8||Door Sensor||2||PC||One for controlling LED lamp, the other for open door alarm|
|10||Power Distribution Unit||1||Set|
Grade B Lightning Proof
AC Input: 63A/2P *1;
AC Output: 16A/1P*4;
DC Output: 16A/1P*4
Input Voltage: AC220V.
6. Cabinet Details Introduction
6.1 Components Installation
LED lamp, LED lamp sensor, smoke sensor and door sensor are
installed at the top of the cabinet. Environment monitoring unit
and PDU are installed on 19” rack. Water sensor is installed at the
bottom of the cabinet.Temperature and humidity sensor is installed
at the side inside the cabinet. Air Conditioner and fans are
installed on the door of the cabinet.
6. 2 Cable Entry
Feeder cable and other external cables all use bottom wiring
6.3 Grounding Protection
- The cabinet includes grounding copper bar with anti-corrosion
coating. There are enough screws for wiring connection terminals.
- The metal part of the cabinet should be interconnected and be
connected with grounding bar. Connection resistance between any two
points is lower than 0.1Ω.
- Protective earthing of other equipments inside the cabinet should
be connected to the grounding bar.
6.4 Door lock theft proof design
Damage resistance of the theft proof lock meets GA/T 73-1994
“Mechanical Anti-theft Lock” class B requirement, supporting
Three point lock
6.5 Door Connection and Fastening
The cabinet use inside door hinges,inside installation,inside
fixing, no outer screws and embedded cabinet door, these design can
protect cabinet against the theft and water access. Use anti-loose
threaded connection as structure and bearer connection. Anchor bolt
for fixing cabinet use hot dip galvanized bolts.
6.6 Surface Treatment
The surface of cabinet is made of special outdoor anticorrosive
powder coating, the color is grey.
7. Cabinet Pictures